Commercial and HOA backflow testing in Melbourne and Brevard County
Restaurants, medical offices, shops, apartment communities, and HOAs have more at stake when a device fails or a deadline slips. We connect you with a certified tester, line up every device on your property, and make sure the reports get filed with your utility.
- Restaurants, medical offices, apartment communities, and HOAs
- RPZ and double-check assemblies, with one request for several devices
- Fire lines go to licensed fire contractors
Request a quote
Tell us about your property and we’ll get back to you by phone with a time and a price.
Prefer to talk? Call (321) 529-0685.
Who commercial backflow testing is for
If your building has a backflow preventer on its water line, its irrigation, or its fire system, it probably has a test schedule.
Restaurants and commercial kitchens
Kitchens, ice machines, and beverage systems connect to your water line, so utilities often require stronger backflow protection.
Medical and dental offices
Equipment and treatment areas that tie into the water supply are commonly treated as higher-hazard connections.
Apartment communities and condos
Several buildings, several devices, and a set of due dates that someone has to keep track of.
HOAs and property managers
Common-area irrigation, clubhouses, and pools often mean more than one device per community.
Shops, offices, and shopping centers
Landscape irrigation and the building’s water line may each have their own device.
Industrial and chemical sites
Where chemicals or process water are involved, utilities usually require the highest level of protection.
What’s different about testing a commercial property
Commercial properties tend to have reduced pressure zone (RPZ) assemblies, larger pipe sizes, and more than one device. An RPZ has a relief valve in addition to its check valves, and the test takes a closer look at all of it.
Water is shut off to the device during part of the test, and an RPZ can discharge water from its relief valve while it’s being tested. Telling us your hours and where the device drains helps the tester plan a time that stays out of your way.
Paperwork matters too. Your utility needs a passing report for each device, so every assembly on your property should be accounted for before the deadline.
What to have ready
- The address of every building or device
- Where each device is (mechanical room, vault, outside wall, irrigation line)
- Any notice from your utility or Compliance Engine
- Your business hours and the best time for a short water shutoff
- A contact who can give the tester access
Property managers and HOAs: one request for every device
If you manage several properties, keeping track of test dates is half the job. Send us a list of your addresses and devices, or just the utility notice for each one, and we’ll arrange them as one request with the tester.
Each device gets its own passing report, filed with the right utility, so you aren’t reconciling paperwork across communities at the last minute.
Fire sprinkler lines are handled differently
Backflow preventers on fire lines have to be tested by licensed fire contractors. The City of Melbourne says so on its list of local certified testers, and a standard backflow test on a fire line may not count with your utility or your fire inspector.
If your notice is about a fire line, call us and we’ll point you to the right company before you pay for a test that won’t be accepted.
How commercial testing works
-
Send us your devices
Call or send the form with your addresses, device count, and any notice dates.
-
Schedule around your business
Tell us your busy hours. The tester plans around short water shutoffs where possible.
-
Test, repair if needed, and file
A certified tester tests each device. If one fails, you get a repair quote first, then a retest. Passing reports go to your utility.
Commercial backflow testing questions
What property owners and managers usually ask before booking.
Do commercial properties need annual backflow testing?
Annual testing is the most common requirement for commercial properties, though your utility sets the exact schedule. The notice you received lists each device and its due date.
What is an RPZ assembly, and why does my business have one?
A reduced pressure zone (RPZ) assembly has two check valves with a relief valve between them. Utilities usually require one where a backflow event could be a serious health hazard, such as restaurants, medical offices, and sites with chemicals or industrial processes.
Will testing interrupt my water?
Water is shut off to the device for part of the test, and an RPZ may discharge some water while it’s being tested. Tell us your busy hours when you schedule so the tester can plan around them.
How long does a commercial backflow test take?
A single, easy-to-reach assembly often takes about an hour. Larger devices, tight mechanical rooms, and several assemblies on one property add time. You’ll get an estimate when you schedule.
Can you test several buildings or addresses in one request?
Yes. Send us the list of addresses and devices, or a utility notice for each one, and we’ll arrange them as one request with the tester.
Who tests fire sprinkler line backflow preventers?
The City of Melbourne notes that fire line backflow preventers have to be tested by licensed fire contractors. We’ll point you to the right company for those devices.
What happens if one of my devices fails?
Many devices can be repaired and retested, and some need to be replaced. You get a quote before any work begins, and the passing report is what gets filed with your utility.
Who files the reports with my utility?
The certified tester completes the report for each device and submits it to your utility or its tracking service. Confirm this when you schedule so every device is covered.
What should I have ready before I call?
The address of each building, where each device is located, how many there are, and any notice from your utility or Compliance Engine. Your business hours and a contact who can give access help too.
Do you serve my city?
We serve Melbourne, West Melbourne, Palm Bay, Indian Harbour Beach, Satellite Beach, Melbourne Beach, Indialantic, Viera, Suntree, Rockledge, Cocoa, Cocoa Beach, Merritt Island, and Titusville. If your city isn’t listed, call and ask.
Have a list of devices to test?
Send the addresses and your due dates and we’ll take it from there.